熱熔膠機是熔化熱熔膠的設備。當不工作時，熱熔膠在主機冷卻，熱熔膠管和熱熔膠槍留在里面。當廠家需要使用其他熱熔膠時，不能直接在主機中添加另一臺熱熔膠機，需要將舊膠排干。下面巔峰自動化設備公司教你一種快速換膠的方法，這種方法適用于換類似的熱熔膠。
Hot melt glue machine is the equipment for melting hot melt glue. When it is not working, the hot melt adhesive is cooled in the main engine, and the hot melt hose and hot melt adhesive gun remain in it. When the manufacturer needs to use other hot-melt adhesive, it is not allowed to directly add another hot-melt adhesive machine to the host, and the old adhesive needs to be drained. The following peak automation equipment company teaches you a quick glue change method, which is suitable for changing similar hot melt glue.
1.要消除機器內的熱熔膠。將熱熔膠機加熱到工作溫度，清除膠盒內的膠水。
1. First, remove the hot melt adhesive in the machine. Heat the hot melt glue machine to the working temperature and remove the glue in the glue box.
2.戴上防護手套，用無脫毛布擦拭膠盒內壁。不要使用鋒利的工具。
2. Wear protective gloves and wipe the inner wall of the rubber box with a lint free cloth. Do not use sharp tools.

3.擦拭后，加入一些新的膠水，加熱到新膠水的工作溫度。
3. After wiping, add some new glue and heat it to the working temperature of the new glue.
4.待熱熔膠機內的熱熔膠熔化后，拆下熱熔膠槍?zhuān)瑢崛勰z管內剩余的膠水排出。這時，可以將熱熔膠槍清洗干凈。待熱熔膠機和熱熔膠管排出后，連接熱熔膠槍。將1 / 3的新膠加入主機，加熱熔化，并將剩余膠倒入熱熔膠槍中排出。
4. After the hot melt adhesive in the hot melt adhesive machine melts, remove the hot melt adhesive gun and discharge the remaining glue in the hot melt hose. At this time, the hot melt glue gun can be cleaned. After the hot melt adhesive machine and the hot melt hose are discharged, connect the hot melt adhesive gun. Add 1 / 3 of the new glue to the main engine, heat and melt, and pour the remaining glue into the hot-melt glue gun to discharge.
5.別忘了清潔過濾器。這條路比較快。更換前一定要詢問機器廠家，聽從他們的指導，隨意更換膠水。這不是我們自己和設備的責任。
5. Don't forget to clean the filter. This road is faster. Before replacement, be sure to ask the machine manufacturer, follow their guidance and replace the glue at will. This is not the responsibility of ourselves and the equipment.