將上膠機置于平整、清潔的地方，打開電源和供氣，打開電源，開始工作。
　　Place the glue applicator in a flat and clean place, turn on the power supply and air supply, turn on the power supply and start working.
　　1. 打開氣泵開關、主電源開關和控制臺開關。按下控制臺上的手動按鈕，在顯示屏上找到原點設置，點擊輔助原點設置，然后點擊頭原點設置。
　　1. Turn on the air pump switch, main power switch and console switch. Press the manual button on the console, find the origin setting on the display, click the auxiliary origin setting, and then click the head origin setting.
　　2. 上膠機設置好后，回到玻璃厚度設置。是玻璃厚度，然后是鋁墊片，然后是玻璃厚度。注意，只要命令位置與當前位置值匹配，輸送機上就不會有玻璃。
　　2. After the gluer is set, return to the glass thickness setting. First, the thickness of the glass, then the aluminum gasket, then the thickness of the glass. Note that there will be no glass on the conveyor as long as the command position matches the current position value.
　　3.混合后，按下一桶膠水上的按鈕，按下按鈕選擇工作，開始按下按鈕膠水，按下按鈕切割。此時，膠頭會自動上膠，如果白膠看不見，按下按鈕切斷，按下鏈接線自動運行，但膠頭會自動切斷。
　　3. After mixing, press the button on the first bucket of glue, press the button to select work, start to press the button glue, and press the button to cut. At this time, the rubber head will be automatically glued. If the white rubber cannot be seen, press the button to cut off, press the link line to automatically run, but the rubber head will automatically cut off.

　　上膠機是現代工業(yè)中一種新型的自動噴涂設備?？蓢娡扛鞣N尺寸、形狀的產品。該機主要性能有可調噴膠形狀、可調噴膠尺寸、可調反向吸膠量、不同噴膠方式，對噴膠室的清洗有方便的要求。主要用于皮革制品、手袋、箱包、玩具、包裝等行業(yè)。
　　Sizing machine is a new type of automatic spraying equipment in modern industry. It can spray products of various sizes and shapes. The main features of the machine are adjustable spray shape, adjustable spray size, adjustable reverse suction, different spray methods, which have convenient requirements for cleaning the spray chamber. Mainly used in leather products, handbags, bags, toys, packaging and other industries.
　　以上內容來自膠機小編，本文不代表本站觀點。
　　The above content comes from the small edition of glue machine, this paper does not represent the viewpoint of this station.